The XP-20F Static Control Blower is approved for use in Class I, Division 1 and 2, Group D hazardous areas. This is the only blower available on the market with UL approval for use in hazardous areas.
The XP-20F Static Control Blower can be powered by either the XP167 or by the N167 Power Supply. The XP Power Supply is approved for mounting within Class I, Division 1 and 2, Group D hazardous areas. The N167 Power Supply, which must be mounted outside the hazardous area, is approved for use in electrostatic finishing processes involving spray painting, dipping, coating, and liquid printing processes. The high voltage cable connecting the XP-20F Blower to either type of power supply must be run in rigid or flexible metal conduit. All conduit runs are then sealed at the power supply enclosure. See the XP167 Power Supply dimensional drawing in the Power Supply section for conduit length allowances.
We recommend that you call Simco Customer Service at 215-822-6401 if you are not already familiar with installing and operating this equipment.
UL approved for Class I, Division 1 and 2, Group D hazardous areas.
Features
- UL Listed for Class I, Division 1 and 2, Group D hazardous areas
- Designed for rugged industrial use
- Explosion proof motor
- Powerful air blast: 285 CFM
- Replaceable air intake filter
| .jpg)
|
