SIMCO Industrial Static Control   FM Approvals
How to Place an Order
SIMCO
View All Charging Applicators
SIMCO
View All Charging Power Supplies
SIMCO
Tech Center/Blog
SIMCO
HOME/ PRODUCT LINES/ CHARGING POWER SUPPLIES/ CHARGEMASTER CM 20, STATIC CHARGING SYSTEM

Charging Power Supplies

Chargemaster CM 20, Static Charging System

The Chargemaster CM20 is a switch-mode, power supply. The unit’s output current is electronically restricted and protected against arcing. The output voltage can be set between 0 and the unit’s maximum voltage (20 kV). The power supply incorporates functions for remote on/off and remote voltage adjustment. relay.

The Chargemaster is CE approved.

Chargemaster CM 20, Static Charging System

 

Typical Use / Specifications / Download Files

Typical Use:

Chill Roll Edge Pinning on Cast Film LineRoll to Roll ChangeoverPlastic Bagmaking
 
 
Converting: Using an Electrostatic Charge for Roll-to-Roll Changeover
Converting: Using an Electrostatic Charge on Binders and Video Cassette Covers
Converting: Electrostatic Charging for Bagmaking
Packaging: Electrostatic Charging on Dry Bonding Web/Sheet Lamination
Packaging: Using an Electrostatic Charge for Interleaving a protection layer
Packaging: Electrostatic Charging for Bagmaking
Printing/Bindery: Using an Electrostatic Charge for Ribbon Tacking
Printing/Bindery: Using an Electrostatic Charge for Card Insertion on a Saddle Stitcher
Printing/Bindery: Electrostatic Charging for Card Insertion on Perfect Bound Line
Printing/Bindery: Electrostatic Charging for Chill -Tack Systems
Plastics: Electrostatic Charging on Chill Roll Edge on Cast Film Line
Plastics: Using an Electrostatic Charge for Interleaving a protection layer
Plastics: Electrostatic Charging for Bagmaking