The XP-2 Static Control Bar is UL listed for Class I, Divisions 1 and 2, Group D Hazardous Locations and FM approved when used with a Simco XP167 or XP267 Power Supply, which can be mounted within the hazardous area. The XP-2 Static Control Bar is also approved for use with the N167 or N267 Power Supplies, which must be mounted outside the hazardous area, in electrostatic finishing processes involving spray painting, dipping, coating, and liquid printing processes.
The XP-2 Static Control Bar has 1/2" NPT male threads at the cable end of the bar for connection to rigid or flexible metal conduit. All conduit runs are then sealed at the power supply enclosure. See the XP167 Power Supply dimensional drawing in the Power Supply section for conduit length allowances.
We recommend that you call Simco Customer Service at 215-822-6401 if you are not already familiar with installing and operating this equipment.
UL Listed for Class I, Division 1 and 2, Group D hazardous locations and FM approved.
| .jpg)
|
.jpg)
.jpg)
.jpg)