|
|
Power Supplies for Static Control Products |
XPM167 and XPM267 Power Supplies
| Blue Bar HL Data Sheet
| The XPM167and XPM267 Power Supplies are UL/CUL approved for mounting outside of a hazardous location. The XPM167 has an arc detection circuit to shut down the power supply within 40 milliseconds in the event of an arc from the bar or cable. Includes a monitoring system, when operated with the Blue Bar HL, to detect arcing conditions and short circuit on the ionizing points and the cable. Indicator lamps verify input and output voltage status as well as arc detection. Integrated relay contacts allow for remote monitoring of these features.
| .jpg)
|
| Typical Use / Specifications / Compatible Ionizers / Download Files |
Specifications: | |
| XPM167 |
|
| Input Requirements |
120V, 60Hz |
| Output Voltage |
7kV, 3mA max |
| Number of outputs for static eliminators |
4 |
| Max Length of static bars which can be attached |
300 inches |
| Does the unit accept shielded cable |
N/A |
| Acceptable for hazardous locations |
No |
| XPM267 |
|
| Input Requirements |
230V, 60Hz |
| Output Voltage |
7kV, 3mA max |
| Number of outputs for static eliminators |
4 |
| Max Length of static bars which can be attached |
300 inches |
| Does the unit accept shielded cable |
N/A |
| Acceptable for hazardous locations |
No |
Part Numbers: | |
| XPM167 |
4009064 |
| XPM267 |
4009065 |
|
|
