SIMCO - Industrial Static Control and Static Eliminator

Static Control Nozzles
R55 Static Control Nozzle
R55 Data Sheet
The R55 Static Control Nozzle provides a powerful blast of static eliminating air used for cleaning and neutralizing surfaces in a variety of applications. It is particularly effective for separating paper and film sheets on feed piles. The R55 has eight active ionization pins to deliver outstanding depth and range of static elimination. The nozzle is shockless for operator safety. The R55 Static Control Nozzle comes in your choice of two air exit configurations, a slot or a double row of perforation holes (best for feed piles). It can be ordered with an axial (straight) or radial (right angle - preferred for feed piles) high voltage cable exit. Each nozzle comes with an adjustable two-piece mounting bracket and hardware. The cable for the R55 is metal shielded, which reduces EMI and RFI emissions and allows the cable to be mounted against metal without danger of burn-out. The cable and power supply for the R55 must be ordered separately. CE approved.

Specifications:
Line Voltage Requirements	120V, 60 Hz, 230V, 50/60 Hz
Size(Individual Nozzle)	2 in x 1 in x 2 1/8 in (W x H x L)
Maximum Air Pressure(clean, dry air)	88 psi maximum
Air Flow (at 30 psi)	Slotted 2.45 SCFM, Perf 2.95 SCFM
Air Supply Connection	5/16 inch (8mm) nipple (hose barb)
Working Distance from substrate	up to 6 inches
Operating Temperature Limit	140F without air, 176F with air
Static Charge Discharge Time	.5 seconds at 6 inches at 30 psi (5000V to 500V)
For use with the True AC Monitoring Power Supply
Part Numbers:
R55-Perforated air exit and straight cable exit	4081008
R55-Perforated air exit and right angle cable exit	4081009
R55-Slotted air exit and straight cable exit	4081010
R55-Slotted air exit and right angle cable exit	4081011
2.5 meter (8.8	4081012
5.0 meter (17.6	4081013

Static Control Nozzles