The N167 (120V) and N267 (230V) are Simco's most versatile power supplies. They can be used with the ES2A4 Ionizing Air Gun and several shockless static bar models (ME100, MEB, MEJ, PLS and MEC). A terminal block connector inside the power supply allows for the connection of up to four static eliminators to one power supply. The units accept either shielded or unshielded cable.
The N167 and N267 have the added benefit of being FM approved for use in Class I, Division 1 and 2, Group D hazardous areas for electrostatic finishing applications involving spray painting, dipping, coating, and liquid printing. The power supplies must be installed outside of the hazardous area and be used to power an XP-20F Blower(s) or XP-2 Static Bar(s) located inside the hazardous location. The connecting high voltage cable must be run through rigid or flexible metal conduit sealed at each end.
The N167 and N267 are designed with short circuit protection (no fuse required!) which protects the power supply in the event of a short in the static eliminator or cable.
UL, cUL, CSA, CE and FM approved.
| .jpg)
|
