SIMCO - Industrial Static Control and Static Eliminator

Power Supplies for Static Control Products
D167Q/D257Q and D165Q/D265Q Power Supplies
Nozzle Data Sheet \| Blue Bar Data Sheet
The D167Q and D165Q (120V), D257Q and D265Q (230V), can be used with the Blue Bar R50 and HE Nozzles (each will power up to 100 nozzles in series). These power supplies can also be used with shockless static bars with shielded cable (contact Simco Customer Service at 215-822-6401 for more details). The D167Q and D257Q are designed with short circuit protection (no fuse required!) which protects the power supplies in the event of a short in the static eliminator or cable. The units are compact in size and built to perform in rugged manufacturing environments. UL, CSA and CE approved.

Specifications:
D167Q
Input Requirements	120V, 50/60Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	2
Max Length of static bars which can be attached	200 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	No
D257Q
Input Requirements	230V, 50/60Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	2
Max Length of static bars which can be attached	200 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	No
D165Q
Input Requirements	120V, 60 Hz
Output Voltage	5 kV, 3mA max
Number of outputs for static eliminators	2
Max Length of static bars which can be attached	200 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	No
D265Q
Input Requirements	230V, 50Hz.
Output Voltage	5 kV, 3mA max
Number of outputs for static eliminators	2
Max Length of static bars which can be attached	200 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	No
Part Numbers:
D167Q	4000074
D257Q	4000075
D165Q	4009227
D265Q	4009228

Power Supplies for Static Control Products