These 4 and 6 roll contact cleaning / tacky roll cleaning systems remove particulate from both the top and bottom web-surface. The QuadClam and HexClam Web Cleaning Systems allow the top-half of the cleaner assembly to open and the tape-roll to slide out on a drawer. This greatly facilitates tape maintenance and web threading. The HexClam is available to 24” and the QuadClam is for 30”– 60” widths.
Features:
► Quick release gudgeons for quick removal of tapes.
► Air cylinders engage & separate rolls.
► Anti-Static bar and power supply for easy particulate removal
► Operator panel remotely mounted
► Speed: 500 fpm on narrow webs and up to 500 fpm on wide webs
► Rugged SS/AL construction with Plexiglas safety covers
Contact Cleaning
Product waste results from dust and particulate contamination on surfaces of film, paper, or other substrates. Small particles adhere to the web surface due to static electricity, moisture, etc. These particles lower your product quality, cost you money, cause production loss and dissatisfied customers. Vacuum systems are generally effective in removing contaminants down to 20 micron in size. Simco’s Narrow Web Contact Cleaning Systems can remove particles from 20 down to 1 micron. Using CCRs in a nip configuration, the CCR applies from 0.5 to 2 psi pressure on the web, squeezing out the boundary layer of air. Performance evaluations reveal a cleaning efficiency of 97% of particles down to 10 micron in size and removal of most particles to 1 micron in size.
| .jpg)
|
Click here to install Adobe Acrobat Reader