|
|
Using an Electrostatic Charge for Roll-to-Roll Changeover |
Tetra Static Charging Bar
| Chargemaster Brochure
| Distinguished by high performance and rugged construction, the Tetra Static Charging Bar consists of an inner bar of ionizing points mounted in a round rigid housing. The ionizing points are easy to clean with the supplied cleaning brush. A Tetra Bar incorporates a straight-end HV connector or an optional right-angle connector. The high voltage cable is flame retardant, highly flexible, and removable to simplify bar maintenance.
The optional point cover, which can be cut to size, can be used to cover points which are not facing the material that is being charged. This helps reduce the risk of arcing to nearby surfaces.
The Tetra Static Charging Bar is CE approved.
To view a video of In-Mold Labeling using the Chargemaster System click here
| .jpg)
|
| Typical Use / Specifications / Power Supplies and Accessories / Download Files |
Specifications: | |
| Type |
Direct connect to high voltage |
| Points |
316 SS fixed |
| Profile |
1.31 inch diameter PVC |
| Inner Bar |
Teflon |
| Length |
6 inches to 144 inches overall length is 2.31 inches longer |
| Voltage Rating |
30 kV, 50 kV with added insulation |
| Weight |
.5 lb per foot |
| Cable |
Removable, straight exit standard, 50 kV rated, 221 degrees F, 10 ft length |
| Mounting |
Fully adjustable mounting centers with bar rotation of +/- 30 degrees |
| Hardware |
3/8-16 nylon nut and bolt kit |
| Temp. Rating |
110 degrees F (43 degrees C) |
Part Numbers: | |
| Call Customer Service at 215-822-6401 for part numbers. |
|
|
|
