SIMCO - Industrial Static Control and Static Eliminator

Using an Electrostatic Charge on In Mold Labeling (IML)
Pinner and Pinner Bar NR Arc Resistant Static Charging Bars
Specification Sheet \| Chargemaster Brochure
The Pinner Bar and Pinner Bar NR (Non-Replaceable Pins)Static Charging Applicator are current limited and arc resistant, and feature 50 kV rated high-voltage cable with silicone sleeving to ensure operator and equipment safety. The Pinner Bar NR has non-replaceable pins. The Pinner Bar features removable ionizing pins, which significantly extends the life of the bar. The bars are available with an optional high-voltage cable connector so bars can be easily removed without unthreading the cables (e-mail or call Simco Customer Service at 215-822-6401 for details). Pinner Static Charging Bars are rated for use in temperatures up to 200 degrees F and are compatible with Simco Chargemaster and ECS200 Power Supplies. To view a video of In-Mold Labeling using the Chargemaster System click here

Specifications:
Type	Resistor-coupled, arc resistant
Temp. Rating	200 degrees F (93 degrees C)
Profile	3.25 inches x 0.75 inches, Glass-filled Vinylester
Inner Bar	Epoxy
Length	3 inches to 144 inches (overall length is 2 inches longer)
Voltage Rating	30 kV, 50 kV with added insulation
Weight	2 lb. 2 oz. per foot
Cable	Fixed mount, straight exit, 50kV rated, 221 degree F, 10 ft. length
Mounting	Fully adjustable bolt head channel
Hardware	5/16-18 nylon nut and bolt kit
Part Numbers:
Call Customer Service at 215-822-6401 for part numbers.

Using an Electrostatic Charge on In Mold Labeling (IML)