SIMCO - Industrial Static Control and Static Eliminator

Electrostatic Charging on Dry Bonding Web/Sheet Lamination
Chargemaster CM-BP 30 & CM-BP 60, Static Charging Systems
Specification Sheet \| IML Article from Plastics Technology \| Chargemaster Brochure
Simco’s Chargemaster CM-BP 30 (30kV) and CM-BP 60 (60kV) Electrostatic Generating System supply the high voltage for charging bars and various applicators, which are used to temporarily bond materials together, providing a simple and economical solution for a wide range of production processes. The CM-BP 30 and CM-BP 60 power supplies provide both positive and negative polarities and feature remote ON/OFF capability. The output voltages can also be controlled from a remote location via 0-5V, 0-10V, 0-20mA or 4-20mA voltage or current sources. The power supplies also supply a 0-5V or 0-10V output signal to remotely monitor the output voltages and currents. Each Chargemaster CM-BP Power Supply incorporates high frequency switch-mode and power factor corrected technology. The systems are electronically current limited and arc protected. The output voltages are adjustable from zero to full rated output at maximum rated current. To view a video of In-Mold Labeling using the Chargemaster System click here

Specifications:
Output Voltage:	• CM-BP 30 - 0-30kV DC (both positive and negative polarities)
	• CM-BP - 0-60kV DC (both positive and negative polarities)
Output Current (Max):	CM-BP 30 - 5.0mA; CM-BP 60 - 2.5mA
Max. Output Power:	300W (150W per polarity)
Output Connections:	8 SLCC Ports (Four positive polarity and four negative)
Remote Control Connection:	25 Pin D-Sub Cable
Remote Voltage Control:	0-5V, 0-10V, 0-20mA or 4-20mA For 0- 30kV, (CM-BP 30) and 0-60kV, (CM-BP 60). Input control signals are selectable via dip switches on the
Remote Control Functions:	• Switching high voltage On/Off
	• Output voltage control via standard industry control signals.
	• Output voltage and current monitoring
	• Overload indication monitoring.
	• Easy to configure via D-Sub cable

Part Numbers:
CM-BP 30 (±30kV Output) P/N:	4011541
CM-BP 60 (±60kV Output) P/N:	4011542

Electrostatic Charging on Dry Bonding Web/Sheet Lamination