|
|
Using an Electrostatic Charge for Card Insertion on a Saddle Stitcher |
Chargemaster CM30 & CM60, Static Charging Systems
| IML article from Plastics Technology Magazine | In-Mold Labeling Data Sheet | Chargemaster Brochure
| The Chargemaster CM is a switch-mode, power factor corrected, power supply. The unit’s output current is electronically restricted and protected against arcing. The output voltage can be set between 0 and the unit’s maximum voltage (30 kV or 60 kV). The power supply incorporates functions for remote on/off, remote voltage adjustment and voltage and current display.
The Chargemaster Static Charging System is CE approved.
To view a video of In-Mold Labeling using the Chargemaster System click here
| .jpg)
|
| Typical Use / Specifications / Download Files |
Specifications: | |
| CM30 |
|
| Output Voltage |
0-30 kV DC |
| Output Current, Max. |
0-5 mA DC |
| Output Power, Max. |
150 W |
| Output Ports |
4 |
| Dimensions (WxHxD) |
10.5" x 4.25" x 13.5" |
| Certification |
CE |
| CM60 |
|
| Output Voltage |
0-60 kVDC |
| Output Current, Max. |
2.5 mADC |
| Output Power, Max. |
150 W |
| Output Ports |
4 |
| Dimensions (WxHxD) |
10.5" x 4.25" x 15" |
| Certification |
CE |
Part Numbers: | |
| Standard (or Stacked Units) |
|
| CM30-N, negative polarity, 115/230 VAC |
4010610 |
| CM30-P, positive polarity, 115/230 VAC |
4010611 |
| CM60-N, negative polarity, 115/230 VAC |
4010612 |
| CM60-P, positive polarity, 115/230 VAC |
6010613 |
| Wall Mounted Units |
|
| CM30-N, negative polarity, 115/230 VAC |
4011275 |
| CM30-P, positive polarity, 115/230 VAC |
4011276 |
| CM60-N, negative polarity, 115/230 VAC |
4011277 |
| CM60-P, positive polarity, 115/230 VAC |
4011278 |
|
|
