XP167 and XP267 Power Supplies

XP series HL power supplies The XP167 (120V) and XP267 (230V) are UL listed and FM approved for use in Class I, Division 1 and 2, Group D Hazardous Locations when used with XP-2 Static Bars and XP-20F Blowers.

The power supplies are equipped with an arc detection cut-off curcuit with alarm capability. In the unlikely event that the static eliminator or cable should arc to ground, the arc detection circuit senses the short and shuts down the power supply within 40 miliseconds. The units include relay contacts that can be used to activate a remote visual or audio alarm and to trigger a PLC, for instance to shut down the line.

The XP Power Supplies can be mounted within the hazardous location

Specifications:
XP167
Input Requirements	120V, 60 Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	N/A
Acceptable for hazardous locations	Yes
XP267
Input Requirements	230V, 60 Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	N/A
Acceptable for hazardous locations	Yes
Part Numbers:
XP167	4009088
XP267	4009089

Typical Use

Used with XP-2 Static Bars and XP20-F Blowers in Class I, Division 1 and 2, Group D hazardous areas.

Download Files

Dimensional Drawing

To view literature that has been downloaded or while online, you need to have Adobe Acrobat Reader installed on your computer.


Blue Bar HL Static Control Bar Now, the well known, high output “Blue Bar” static control bar is available in a hazardous location

Transvector with Blue Bar HL Static Control Bar A Transvector with Blue Bar HL Static Control Bar provides a highly efficient "air knife"

Power Supplies