HS Static Control Nozzle

HS Static Control
Nozzle Specification Sheet

HS Static Control Nozzles are "shockless" nozzles. The term shockless indicates that the ionizing point, located inside the nozzle tip, is capacitively coupled to the high voltage source, thus limiting the current at the point to a very low level. Under normal conditions, direct contact with the point will not result in a shock sensation. HS Static Control Nozzles can be installed individually, in series, and mounted on a standard air bar header.

UL, CSA, and FM approved.

Specifications:
Line Voltage Requirements	115 V, 50/60 Hz, 230 V, 50/60 Hz
Size(Individual Nozzle)	2 9/16 inches high by 13/16 inches wide by 2 1/2 inches long
Maximum Air Pressure(clean, dry air)	100 psi maximum
Air Flow (at 30 psi)	4.4 SCFM
Air Supply Connection	1/8 inch NPT on nozzle
Working Distance from substrate	3 inches to 10 inches
Operating Temperature Limit	150° F (66° C)
Static Charge Discharge Time	0.6 seconds at 6 inches at 30 psi (5000 V to 500V)
Part Numbers:
HS Nozzles - Individual Nozzles
HS Nozzle - Thru	4002631
HS Nozzle - End - 10	4002632
HS Nozzle - End - 20	4002633
HS Nozzle - End - 30	4002634
HS Nozzles - Complete Assembly On Header:
3" centers - Thru	4103975
4" centers - Thru	4103976
5" centers - Thru	4103977
6" centers - Thru	4103978
7" centers - Thru	4103979
8" centers - Thru	4103980
9" centers - Thru	4103981
10 " centers - Thru	4103982
HS Nozzles - End	4103983

Typical Use

Automotive/Converting/Graphic Arts/Plastics: Ideal for custom configuration around injection molded parts.

Download Files

To view literature that has been downloaded or while online, you need to have Adobe Acrobat Reader installed on your computer.

Power Supplies:
F167 and F267 Power Supplies Used primarily with the AS20 Blower, HS Nozzle, and shockless static bars (ME100, MEB, MEJ, PSH-N, and MEC).

N167 and N267 Power Supplies Used with a variety of "shockless" static eliminators, including certain hazardous location applications.

Guns & Nozzles